Cruise Control System Tc And Cg Terminal Circuit

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
Cruise Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK HARNESS AND CONNECTOR (DLC3 - ECM AND BODY GROUND)

CRUISE CONTROL SYSTEM - TC and CG Terminal Circuit


DESCRIPTION

Connecting terminals TC and CG of the DLC3 causes the system to enter self-diagnostic mode. If a malfunction is present, DTCs will be output.
HINT:
When a particular warning light remains blinking, a ground short in the wiring of terminal TC of the DLC3 or an internal ground short in the relevant ECU is suspected.

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Cruise Control.Cruise Control System.Cruise Control System  Tc And Cg Terminal Circuit


INSPECTION PROCEDURE

1.CHECK HARNESS AND CONNECTOR (DLC3 - ECM AND BODY GROUND)
Land Cruiser. Urj200, 202 Grj200 Vdj200.Cruise Control.Cruise Control System.Cruise Control System  Tc And Cg Terminal Circuit
  1. Disconnect the A38*1 or A52*2 ECM connector.

    HINT:
    1. *1: for LHD
    2. *2: for RHD
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    for 1GR-FE LHD, 1UR-FE LHD, 3UR-FE LHD
    Tester Connection
    Condition
    Specified Condition
    E22-13 (TC) - A38-16 (TC)
    Always
    Below 1 Ω
    E22-4 (CG) - Body ground
    E22-13 (TC) - Body ground
    Always
    10 kΩ or higher
    for 1GR-FE RHD, 1UR-FE RHD
    Tester Connection
    Condition
    Specified Condition
    E22-13 (TC) - A52-16 (TC)
    Always
    Below 1 Ω
    E22-4 (CG) - Body ground
    E22-13 (TC) - Body ground
    Always
    10 kΩ or higher
    for 1VD-FTV LHD
    Tester Connection
    Condition
    Specified Condition
    E22-13 (TC) - A38-27 (TC)
    Always
    Below 1 Ω
    E22-4 (CG) - Body ground
    E22-13 (TC) - Body ground
    Always
    10 kΩ or higher
    for 1VD-FTV RHD
    Tester Connection
    Condition
    Specified Condition
    E22-13 (TC) - A52-27 (TC)
    Always
    Below 1 Ω
    E22-4 (CG) - Body ground
    E22-13 (TC) - Body ground
    Always
    10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)