Headlight Cleaner Actuator - Removal

Lexus IS250 IS220d GSE20 ALE20 - WIPER AND WASHER

HEADLIGHT CLEANER ACTUATOR - REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL
Headlight Cleaner Actuator - Removal. WIPER AND WASHER. Lexus IS250 IS220d GSE20 ALE20

Remove the 11 clips and intake duct seal.

2. REMOVE FRONT BUMPER ASSEMBLY
Headlight Cleaner Actuator - Removal. WIPER AND WASHER. Lexus IS250 IS220d GSE20 ALE20

Using a screwdriver, turn the pin 90 degrees and remove the 2 pin hold clips.

  • HINT:
Tape the screwdriver tip before use.
Use the same procedures for the RH side and LH side.
Headlight Cleaner Actuator - Removal. WIPER AND WASHER. Lexus IS250 IS220d GSE20 ALE20

Put protective tape around the front bumper assembly.

Using a clip remover, remove the 2 clips

Remove the 2 radiator grille protectors.

Remove the bolt and 10 screws.

Headlight Cleaner Actuator - Removal. WIPER AND WASHER. Lexus IS250 IS220d GSE20 ALE20

Disengage the 5 claws and disconnect the front bumper assembly as shown in the illustration.

  • HINT:
  • Use the same procedures for the RH side and LH side.

Disconnect the headlight washer hose. (w/ headlight cleaner system)

Disconnect the connector and remove the front bumper assembly.

3. REMOVE HEADLIGHT CLEANER WASHER NOZZLE
Headlight Cleaner Actuator - Removal. WIPER AND WASHER. Lexus IS250 IS220d GSE20 ALE20

Extend the headlight cleaner washer nozzle.

Remove the headlight cleaner washer nozzle.

  • HINT:
  • Use the same procedures for the RH side and the LH side.
4. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY
Headlight Cleaner Actuator - Removal. WIPER AND WASHER. Lexus IS250 IS220d GSE20 ALE20

Disconnect the headlight washer hose.

Remove the bolt.

Disengage the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration.

  • HINT:
  • Use the same procedures for the RH side and the LH side.