Dtc 43 Abs Control System Malfunction

Brake. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Brake Control Dynamic Control Systems. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

DESCRIPTION

INSPECTION PROCEDURE

CHECK ANTI-LOCK BRAKE SYSTEM

RECONFIRM DTC

DTC 43 ABS Control System Malfunction


DESCRIPTION

This DTC is stored when the VSC system detects a malfunction in the anti-lock brake system.

DTC Code
DTC Detection Condition
Trouble Area
43
A malfunction in the anti-lock brake system.
Anti-lock brake system

INSPECTION PROCEDURE

NOTICE:
After replacing the brake actuator assembly, perform calibration (HILUX_TGN26 RM000000XHR073X.html).
1.CHECK ANTI-LOCK BRAKE SYSTEM

  1. Check if an ABS DTC is output (HILUX_TGN26 RM000000XHV0CGX.html).

    Result
    Result
    		Proceed to
    DTC is not output
    		A
    DTC is output
    		B



B
REPAIR CIRCUIT INDICATED BY OUTPUT DTC (HILUX_TGN26 RM000000XHU08RX.html)
A


2.RECONFIRM DTC

  1. Clear the DTC (HILUX_TGN26 RM000000XHV0CGX.html).

  1. Turn the ignition switch off.

  1. Start the engine.

  1. Drive the vehicle at a speed of approximately 40 km/h (25 mph) or more for 60 seconds or more.

  1. Check if the same DTC is output (HILUX_TGN26 RM000000XHV0CGX.html).

    Result
    Result
    		Proceed to
    DTC is not output
    		A
    DTC is output
    		B



B
REPLACE BRAKE ACTUATOR ASSEMBLY (HILUX_TGN26 RM0000010K000WX.html)
A

USE SIMULATION METHOD TO CHECK (HILUX_TGN26 RM000004QR7002X.html)