Cruise Control System Tc And Cg Terminal Circuit

Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Cruise Control. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK HARNESS AND CONNECTOR (DLC3 - ECM AND BODY GROUND)

CRUISE CONTROL SYSTEM - TC and CG Terminal Circuit


WIRING DIAGRAM


Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25.Cruise Control.Cruise Control System.Cruise Control System Tc And Cg Terminal Circuit


INSPECTION PROCEDURE

1.CHECK HARNESS AND CONNECTOR (DLC3 - ECM AND BODY GROUND)

  1. Disconnect the G39 ECM connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    G18-13 (TC) - G39-11 (TC)
    		Always
    		Below 1 Ω
    G18-4 (CG) - Body ground
    G18-13 (TC) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

REPLACE ECM (HILUX_TGN26 RM0000013Z001IX.html)