Steering Wheel (For Sedan) Installation

Center the spiral cable.

1. Turn the spiral cable counterclockwise until it locks.
   

   HINT:

   The spiral cable turns a maximum of approximately 5 times.





2. Turn the spiral cable 2.5 times clockwise from its locked position and align the center marks.
   

Align the matchmarks and install the steering wheel assembly onto the steering column assembly.

Install the nut.

Torque:

50 N*m{510 kgf*cm, 37 ft.*lbf}

Connect all connectors to the spiral cable.

Confirm that the ignition switch is turned to OFF.

Confirm that the negative battery terminal is detached.

CAUTION:

Do not begin the operation for at least 90 seconds after the negative battery terminal is detached.

Connect the horn terminal.

Connect the airbag connector.

NOTICE:

1. Match the color of the airbag connector with that of the steering pad assembly, and install the airbag connector.
   
2. Securely lock the locking button.
   

Install the steering pad.

Using "Torx" socked wrench T30, tighten the 2 bolts.

Torque:

8.8 N*m{90 kgf*cm, 78 in.*lbf}

NOTICE:

Tighten the 2 bolts while holding the steering pad to prevent it moving upward.