Steering Wheel (For Sedan) Installation

Steering. Yaris. Ncp93, 131
Steering Column. Yaris. Ncp93, 131

  1. ADJUST SPIRAL CABLE

  2. INSTALL STEERING WHEEL ASSEMBLY

  3. INSTALL STEERING PAD

  4. POSITION FRONT WHEELS FACING STRAIGHT AHEAD

  5. CHECK SRS WARNING LIGHT

Steering Wheel (For Sedan) -- Installation


CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (YARIS_NCP93 RM000000KT10D1X.html).


1. ADJUST SPIRAL CABLE


    Yaris. Ncp93, 131

  1. Center the spiral cable.

    1. Turn the spiral cable counterclockwise until it locks.

      HINT:
      The spiral cable turns a maximum of approximately 5 times.


      2. Yaris. Ncp93, 131.Steering Column.Steering System (For Sedan).Steering Wheel (For Sedan) Installation

    2. Turn the spiral cable 2.5 times clockwise from its locked position and align the center marks.



2. INSTALL STEERING WHEEL ASSEMBLY


    Yaris. Ncp93, 131.Steering Column.Steering System (For Sedan).Steering Wheel (For Sedan) Installation

  1. Align the matchmarks and install the steering wheel assembly onto the steering column assembly.

  1. Install the nut.

    Torque:
    50 N*m{510 kgf*cm, 37 ft.*lbf}

  1. Connect all connectors to the spiral cable.



3. INSTALL STEERING PAD


Yaris. Ncp93, 131.Steering Column.Steering System (For Sedan).Steering Wheel (For Sedan) Installation
NOTICE:
Do not use a steering pad that has been dropped.

  1. Confirm that the ignition switch is turned to OFF.

  1. Confirm that the negative battery terminal is detached.

    CAUTION:
    Do not begin the operation for at least 90 seconds after the negative battery terminal is detached.

  1. Connect the horn terminal.

  1. Connect the airbag connector.

    NOTICE:
    1. Match the color of the airbag connector with that of the steering pad assembly, and install the airbag connector.
    2. Securely lock the locking button.


    Yaris. Ncp93, 131

  1. Install the steering pad.

  1. Using "Torx" socked wrench T30, tighten the 2 bolts.

    Torque:
    8.8 N*m{90 kgf*cm, 78 in.*lbf}
    NOTICE:
    Tighten the 2 bolts while holding the steering pad to prevent it moving upward.


4. POSITION FRONT WHEELS FACING STRAIGHT AHEAD


5. CHECK SRS WARNING LIGHT
(YARIS_NCP93 RM000000XFD0CVX.html)