Headlight Assembly Reassembly

Install a new headlight leveling motor base packing.

NOTICE:

After the headlight leveling motor base packing is removed, be sure to replace it with a new one. Failure to do this may cause water ingress.

Turn the aiming screw of the headlight leveling motor LH in the direction indicated by the arrow to engage the shaft.

Turn the headlight leveling motor LH in the direction indicated by the arrow to install it.

Install a new headlight gasket.

NOTICE:

After the headlight gasket is removed, be sure to replace it with a new one. Failure to do this may cause water ingress.

Connect the connector.

Install the light control ECU sub-assembly with the 4 screws.

Install the clearance light bulb to the clearance light socket.

Turn the clearance light bulb and clearance light socket in the direction indicated by the arrow and install them as a unit.

Install the front turn signal light bulb to the front turn signal light socket.

Turn the front turn signal light bulb and front turn signal light socket in the direction indicated by the arrow and install them as a unit.

Install the No. 1 headlight bulb as shown in the illustration.

Lock the set spring to install the discharge headlight bulb as shown in the illustration.

Turn the light control ECU socket in the direction indicated by the arrow to connect it.

Install the headlight socket cover as shown in the illustration.

Install the No. 2 headlight bulb as shown in the illustration.