Entry And Start System Front Passenger Side Door Entry Lock Function Does Not Operate

Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Door Lock. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK FOR DTC

CHECK MANUAL DOOR LOCK OPERATION

CHECK WIRELESS DOOR LOCK CONTROL OPERATION

READ VALUE USING INTELLIGENT TESTER (DOOR LOCK POSITION SWITCH)

READ VALUE USING INTELLIGENT TESTER (LOCK SWITCH)

CHECK ECU AGGREGATION BOX (CERTIFICATION ECU)

INSPECT FRONT DOOR OUTSIDE HANDLE (for Passenger Side)

ENTRY AND START SYSTEM - Front Passenger Side Door Entry Lock Function does not Operate


DESCRIPTION

When the touch sensor built into the front door outside handle (for passenger side) in turned on, a touch sensor ON signal is transmitted to the certification ECU, and a request signal is then transmitted to both the indoor electrical key oscillator and door electrical key oscillator by the certification ECU. Upon receipt of the request signal, the electrical key transmitter transmits an ID code to the certification ECU. When the certification ECU recognizes that the key is not in the cabin and is outside the vehicle, a door lock signal is transmitted to the main body ECU, causing all the doors to be locked.

WIRING DIAGRAM


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Door Lock.Power Door Lock Control System.Entry And Start System Front Passenger Side Door Entry Lock Function Does Not Operate


INSPECTION PROCEDURE

1.CHECK FOR DTC

  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch on (IG) and turn the tester ON.

  1. By following the tester screen display, check whether any DTCs are output.

    OK:
    No DTC output.


NG
Go to DIAGNOSTIC TROUBLE CODE CHART
OK


2.CHECK MANUAL DOOR LOCK OPERATION

  1. Check that all the doors lock when the door control switch (for manual operation) is turned to LOCK and all doors unlock when turned to UNLOCK.

    OK:
    All doors can be locked and unlocked with door control switch.


NG
Go to POWER DOOR LOCK CONTROL SYSTEM
OK


3.CHECK WIRELESS DOOR LOCK CONTROL OPERATION

  1. Check that the wireless door lock and unlock functions operate normally (RAV4_ACA30 RM000001VRW002X.html).

    OK:
    Wireless door lock and unlock functions operate normally.


NG
Go to WIRELESS DOOR LOCK CONTROL SYSTEM (w/ ENTRY AND START SYSTEM)
OK


4.READ VALUE USING INTELLIGENT TESTER (DOOR LOCK POSITION SWITCH)

  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch on (IG).

  1. Turn the intelligent tester on.

  1. Enter the following menus: Body / Main Body / Data List.

  1. Read the Data List according to the display on the intelligent tester.

    Main body ECU:
    Item
    		Measurement Item / Range (Display)
    		Normal Condition
    		Diagnostic Note
    P-Door Lock Pos SW
    		Passenger side door lock position switch signal / ON or OFF
    		ON: Passenger side door is unlocked
    OFF: Passenger side door is locked
    		-
    OK:
    On the intelligent tester screen, the display changes between ON and OFF as shown in the chart above.


NG
Go to LIGHTING SYSTEM (Proceed to Door LOCK Position Circuit) (RAV4_ACA30 RM000002104002X.html)
OK


5.READ VALUE USING INTELLIGENT TESTER (LOCK SWITCH)

  1. Check the Data List to confirm the operation of the door lock switch.

    Certification ECU:
    Item
    		Measurement Item / Range (Display)
    		Normal Condition
    		Diagnostic Note
    P-Door Trigger Switch
    		Front passenger side door handle (lock switch) / ON or OFF
    		ON: Lock switch is pushed
    OFF: Lock switch is not pushed
    		-
    OK:
    On tester screen, item changes between ON and OFF according to above chart.


NG
Go to step 7
OK


6.CHECK ECU AGGREGATION BOX (CERTIFICATION ECU)

  1. Temporarily replace the ECU aggregation box (certification ECU) with a new or normally one.

  1. Check that the entry lock function operates normally (RAV4_ACA30 RM000001VGF003X.html).

    OK:
    Entry lock function operates normally.


NG
REPLACE INSTRUMENT PANEL JUNCTION BLOCK (MAIN BODY ECU)
OK

END (CERTIFICATION ECU IS DEFECTIVE)

7.INSPECT FRONT DOOR OUTSIDE HANDLE (for Passenger Side)
Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Door Lock.Power Door Lock Control System.Entry And Start System Front Passenger Side Door Entry Lock Function Does Not Operate

  1. Disconnect the front door outside handle (for passenger side) connector.

  1. Measure the resistance between the terminals when the trigger switch is operated.

    Standard resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 3
    		Switch released
    		10 kΩ or higher
    Switch pressed in
    		Below 1 Ω


NG
REPLACE FRONT DOOR OUTSIDE HANDLE ASSEMBLY (for Passenger Side)
OK

REPAIR OR REPLACE HARNESS AND CONNECTOR