Lexus IS250 IS220d GSE20 ALE20 4GR-FSE EMISSION CONTROL
VENTILATION VALVE - INSTALLATION
| 1. INSTALL VENTILATION VALVE |
Install the ventilation valve.
Apply adhesive to 2 or 3 threads.
- Adhesive:
- Part No. 08833-00070, THREE BOND 1324 or equivalent.
Install the ventilation valve.
- Torque:
- 27 N*m{ 275 kgf*cm, 20 ft.*lbf}
| 2. CONNECT VENTILATION HOSE |
Connect the ventilation hose to the ventilation valve.
| 3. INSTALL V-BANK COVER SUB-ASSEMBLY |
Engage the 2 clips on the front of the cover, and then engage the clip on the rear to install the V-bank cover.
- NOTICE:
Be sure to engage the clips securely.
Do not apply excessive force or do not hit the cover to engage the clips. This may cause the cover to break.
LEXUS IS250, IS220d / GSE20 ALE20