Lexus IS250 IS220d GSE20 ALE20 2AD-FHV FUEL
INJECTOR DRIVER - INSTALLATION
| 1. INSTALL INJECTOR DRIVER |
Install the injector driver with the clip and 2 bolts.
- Torque:
- 8.0 N*m{ 82 kgf*cm, 71 in.*lbf}
Connect the 2 wire harness clamps and 3 injector connectors.
| 2. INSTALL AIR DUCT (with Combustion Type Power Heater) |
Install the air duct with the clip and clamp.
| 3. INSTALL ENGINE ROOM SIDE COVER RH |
Install the side cover with the 2 clips.
| 4. INSTALL COOL AIR INTAKE DUCT SEAL |
Install the intake duct seal with the 11 clips.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 6. PERFORM INITIALIZATION |
Perform initialization procedure .
- HINT:
- Some vehicle systems require initialization after reconnecting the negative battery terminal.
LEXUS IS250, IS220d / GSE20 ALE20