INSTALL INJECTOR DRIVER

INSTALL AIR DUCT (with Combustion Type Power Heater)

INSTALL ENGINE ROOM SIDE COVER RH

INSTALL COOL AIR INTAKE DUCT SEAL

CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

PERFORM INITIALIZATION

Install the injector driver with the clip and 2 bolts.

• Torque:
• 8.0 N*m{ 82 kgf*cm, 71 in.*lbf}

Connect the 2 wire harness clamps and 3 injector connectors.

Install the air duct with the clip and clamp.

Install the side cover with the 2 clips.

Install the intake duct seal with the 11 clips.

Perform initialization procedure .

• HINT:

• Some vehicle systems require initialization after reconnecting the negative battery terminal.