INSTALL REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)
INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)
Fuel Lid Lock Control Cable Assembly (For 5 Door) -- Installation |
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (LandCruiser RM00000118W0G8X.html).
| 1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY |
for LHD:
Attach the 14 clamps to install the fuel lid lock control cable.
for RHD:
Attach the 17 clamps to install the fuel lid lock control cable.
Install the lock retainer and turn it clockwise.
 |
Install the cable and turn it clockwise as shown in the illustration.
 |
| 2. INSTALL FRONT FLOOR CARPET ASSEMBLY |
for LHD:
Return the front floor carpet to its original position and attach the 6 clamps.
 |
for RHD:
Return the front floor carpet to its original position and attach the 12 clamps.
 |
| 3. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY |
Connect the fuel lid lock control cable assembly to the fuel lid lock open lever sub-assembly.
Attach the 3 claws to install the fuel lid control lever sub-assembly.
| 4. INSTALL DOOR SCUFF PLATE ASSEMBLY LH |
Attach the 4 clips, 10 claws and 2 guides to install the door scuff plate.
| 5. INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD) |
- HINT:
- Use the same procedure described for the LH side.
| 6. INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH |
w/ Rear No. 2 Seat:
Attach the 4 clips and 2 guides and pass the rear No. 2 seat outer belt floor anchor through the rear quarter trim panel.
Attach the 7 clips and 2 guides to install the rear quarter trim panel.
| 7. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH |
w/o Rear No. 2 Seat:
Pass the rear seatback lock control lever base through the deck trim side panel.
Attach the 5 clips and 8 claws to install the deck trim side panel.
Install the 4 bolts and 2 screws.
Attach the 6 claws and 2 guides to install the rear seatback lock control lever base to the deck trim side panel.
Install the rear No. 1 seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
w/ Rear No. 2 Seat:
Attach the 4 clips and 8 claws to install the deck trim side panel.
Install the 2 bolts and 2 screws.
Install the rear No. 2 seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
Install the rear No. 1 seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
| 8. INSTALL ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat) |
- HINT:
- Use the same procedure for the other assist grip.
Install the assist grip with the 2 bolts.
| 9. INSTALL ASSIST GRIP PLUG (w/ Rear No. 2 Seat) |
- HINT:
- Use the same procedure for all assist grip plugs.
Attach the 2 claws to install the assist grip plug.
| 10. INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover) |
- HINT:
- Use the same procedure for the other front deck side trim cover.
Attach the 2 claws to install the front deck side trim cover
| 11. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover) |
- HINT:
- Use the same procedure for the other No. 1 tonneau cover holder cap.
Attach the 2 claws to install the No. 1 tonneau cover holder cap.
| 12. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK |
- HINT:
- Use the same procedure for the other No. 1 luggage compartment trim hook.
Install the No. 1 luggage compartment trim hook by turning it clockwise.
| 13. INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER |
- HINT:
- Use the same procedure for the other rear No. 1 seat outer lap belt anchor cover.
Attach the 3 claws to install the rear No. 1 seat outer lap belt anchor cover.
| 14. INSTALL REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat) |
 |
- HINT:
- Use the same procedure for the other front luggage compartment trim cover.
Install the luggage hold belt striker and front luggage compartment trim cover with the bolt.
Text in Illustration *1 Luggage Hold Belt Striker
Attach the 4 claws to install the cap.
| 15. INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail) |
Install the floor side rail with the 3 bolts.
| 16. INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail) |
- HINT:
- Use the same procedure described for the LH side.
| 17. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat) |
Attach the 5 clips and 4 claws to install the rear floor mat rear support plate.
| 18. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat) |
Attach the clip to install the No. 1 deck board.
| 19. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat) |
|
- HINT:
- Use the same procedure for the other front luggage compartment trim cover.
Install the luggage hold belt striker and front luggage compartment trim cover with the bolt.
Text in Illustration *1 Luggage Hold Belt Striker
Attach the 4 claws to install the cap.
| 20. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) |
Install the tonneau cover.
| 21. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
 |
Align the paint mark on the rear door opening trim weatherstrip with the mark position on the vehicle and install the rear door opening trim weatherstrip as shown in the illustration.
Text in Illustration *1 Paint Mark *2 Mark Position
| 22. INSTALL REAR DOOR SCUFF PLATE LH |
Attach the 3 clips, 6 claws and 2 guides to install the rear door scuff plate.
| 23. INSTALL REAR DOOR SCUFF PLATE RH (for RHD) |
- HINT:
- Use the same procedure described for the LH side.
| 24. INSTALL QUARTER SCUFF PLATE LH (w/ Rear No. 2 Seat) |
Install the quarter scuff plate with the 2 bolts.
| 25. INSTALL QUARTER SCUFF PLATE RH (for RHD, Rear No. 2 Seat) |
- HINT:
- Use the same procedure described for the LH side.
| 26. INSTALL REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat) |
- HINT:
- Use the same procedure for all rear No. 1 floor step covers.
Attach the 2 claws to install the rear No. 1 floor step cover.
| 27. INSTALL REAR NO. 1 SEATBACK ASSEMBLY (w/ Rear No. 1 Seat) |
for 60/40 Split Double-folding Seat Type LH Side:
Install the rear No. 1 seatback assembly (LandCruiser RM00000468N00TX.html).
for 60/40 Split Double-folding Seat Type RH Side:
Install the rear No. 1 seatback assembly (LandCruiser RM00000468S00WX.html).
| 28. INSTALL REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 1 Seat) |
for 60/40 Split Slide Walk-in Seat Type LH Side:
Install the rear No. 1 seat assembly (LandCruiser RM00000468800TX.html).
for 60/40 Split Slide Walk-in Seat Type RH Side:
Install the rear No. 1 seat assembly (LandCruiser RM00000468D00QX.html).
| 29. INSTALL REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat) |
for Manual Seat Type:
Install the rear No. 2 seat assembly (LandCruiser RM0000045D9008X.html).
for Power Seat Type:
Install the rear No. 2 seat assembly (LandCruiser RM0000045DE00EX.html).
for Face to Face Seat Type:
Install the rear No. 2 seat assembly (LandCruiser RM0000045DV006X.html).
| 30. INSTALL CONSOLE BOX ASSEMBLY |
for Automatic Transmission:
Install the console box assembly (LandCruiser RM0000046JB008X.html).
for Manual Transmission:
Install the console box assembly (LandCruiser RM0000046N4006X.html).
w/ Refrigerated Cool Box:
Install the console box assembly (LandCruiser RM0000046MQ00KX.html).
| 31. INSTALL FRONT SEAT ASSEMBLY |
for Manual Seat:
Install the front seat assembly (LandCruiser RM00000465W00ZX.html).
for Power Seat:
Install the front seat assembly (LandCruiser RM00000466Z00XX.html).
| 32. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (LandCruiser RM000003YMF011X.html).