Front Console Box (For Manual Transmission) Installation


  1. INSTALL REAR CONSOLE BOX ASSEMBLY

  2. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY

  3. INSTALL NO. 1 CONSOLE BOX DUCT (for Single Air Conditioning System)

  4. INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY (w/ Cool Box)

  5. INSTALL CONSOLE PANEL SUB-ASSEMBLY

  6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

  7. INSTALL FRONT NO. 2 CONSOLE BOX INSERT

  8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  9. INSTALL FRONT NO. 1 CONSOLE BOX INSERT

  10. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  11. INSTALL FRONT CONSOLE UPPER PANEL GARNISH

  12. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

  13. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

  14. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

  15. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

  16. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

Front Console Box (For Manual Transmission) -- Installation


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.
  3. A bolt without a torque specification is shown in the standard bolt chart (LandCruiser RM00000118W0G8X.html).


1. INSTALL REAR CONSOLE BOX ASSEMBLY

  1. Connect each connector.

  1. Install the rear console box with the 2 screws, clip and 5 bolts.



2. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY

  1. Connect each connector.

  1. Attach the 4 clips and 4 claws to install the rear console end panel.



3. INSTALL NO. 1 CONSOLE BOX DUCT (for Single Air Conditioning System)

  1. Install the No. 1 console box duct with the clip.



4. INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY (w/ Cool Box)

  1. Attach the 4 claws to install the No. 1 heater to register duct.

  1. Attach the 2 clamps.



5. INSTALL CONSOLE PANEL SUB-ASSEMBLY

  1. Connect each connector.

  1. Attach the 8 clips and 2 claws to install the console panel.



6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. Install the shift lever knob and twist it in the direction indicated by the arrow.



7. INSTALL FRONT NO. 2 CONSOLE BOX INSERT

  1. Attach the 2 clips and guide to install the front No. 2 console box insert.



8. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  1. Attach the 3 clips and 2 guides to install the No. 2 instrument panel under cover.



  1. Install the screw.


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Interior Panels Trim.Instrument Panel Safety Pad.Front Console Box (For Manual Transmission) Installation


    Text in Illustration
    *A
    		for LHD
    		*B
    		for RHD


9. INSTALL FRONT NO. 1 CONSOLE BOX INSERT

  1. Attach the 2 clips and guide to install the front No. 1 console box insert.



10. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  1. for LHD:

    1. Attach the 2 clips and 2 guides to install the No. 1 instrument panel under cover.

    2. Install the screw.

  1. for RHD:

    1. Attach the 3 clips and 2 guides to install the No. 1 instrument panel under cover.

    2. Install the screw.



11. INSTALL FRONT CONSOLE UPPER PANEL GARNISH

  1. w/o Seat Heater System:

    1. Connect the connector.

    2. Attach the 5 clips to install the front console upper panel garnish.

  1. w/ Seat Heater System, w/ Climate Control Seat System:

    1. Connect each connector.

    2. Attach the 5 clips to install the front console upper panel garnish.



12. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

  1. Attach the 5 clips to install the No. 2 instrument panel finish panel cushion.



13. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

  1. Attach the 4 clips to install the instrument panel finish panel end LH.



14. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION
HINT:
Use the same procedure described for the No. 2 instrument panel finish panel cushion.


15. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

  1. Attach the 4 clips to install the instrument panel finish panel end RH.



16. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY

  1. Connect the connector.

  1. Attach the 4 clips to install the integration control and panel assembly.