Center Airbag Sensor Assembly Installation

Check that the ignition switch is off.

Check that the cable is disconnected from the negative (-) battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

Install the airbag sensor with the 3 bolts.

Torque:

18 N*m{184 kgf*cm, 13 ft.*lbf}

NOTICE:

1. If the airbag sensor has been dropped, or there are any cracks, dents or other defects in the case, bracket or connector, replace it with a new one.
   
2. When installing the airbag sensor, be careful that the SRS wiring does not interfere with other parts and that it is not pinched between other parts.
   

Check that the airbag sensor is not loose.

Connect the connector.

for Automatic Transmission:

1. Install the console box assembly (LandCruiser RM0000046JB008X.html).
   

for Manual Transmission:

1. Install the console box assembly (LandCruiser RM0000046N4006X.html).
   

w/ Refrigerated Cool Box:

1. Install the console box assembly (LandCruiser RM0000046MQ00KX.html).
   

Check the SRS warning light (LandCruiser RM000000XFD0N3X.html).