REPLACE YAW RATE AND ACCELERATION SENSOR
DTC C1419 Acceleration Sensor Internal Circuit |
DTC C1435 Yaw Rate Sensor Internal Circuit |
DESCRIPTION
The skid control ECU receives signals from the yaw rate and acceleration sensor via the CAN communication system.The yaw rate and acceleration sensor has a built-in acceleration sensor and detects the vehicle condition using 2 circuits (GL1, GL2).
If there is trouble in the bus lines between the yaw rate and acceleration sensor and the CAN communication system, DTCs U0123 (malfunction in CAN communication with the yaw rate and acceleration sensor) and U0124 (malfunction in CAN communication with the acceleration sensor) are stored.
These DTCs are also stored when calibration has not been completed.
| DTC Code | DTC Detection Condition | Trouble Area |
| C1419 | A data malfunction signal is received from the acceleration sensor. | Yaw rate and acceleration sensor |
| C1435 | A data malfunction signal is received from the yaw rate and acceleration sensor. | Yaw rate and acceleration sensor |
WIRING DIAGRAM
Refer to DTCs C1232, C1243 and C1245 (LandCruiser RM000001EA302PX_02.html).INSPECTION PROCEDURE
- NOTICE:
- When replacing the yaw rate and acceleration sensor, perform calibration (LandCruiser RM00000452J00ZX.html).
- HINT:
- When DTC U0123, U0124 and/or U0126 is output together with DTC C1419 and/or C1435, inspect and repair the trouble areas indicated by DTC U0123, U0124 and/or U0126 first (LandCruiser RM000000YUO0SYX.html).
| 1.REPLACE YAW RATE AND ACCELERATION SENSOR |
Replace the yaw rate and acceleration sensor (LandCruiser RM000000SS507KX.html).
| NEXT | ||
| ||