Exhaust Pipe Installation

Install a new gasket and the front exhaust pipe to the exhaust manifold with 3 new nuts.

Torque:

54 N*m{554 kgf*cm, 40 ft.*lbf}

Using a vernier caliper, measure the free length of the compression spring.

Minimum free length:

38.5 mm (1.52 in.)

1. If the free length is less than the minimum, replace the compression spring.
   

Using a plastic-faced hammer and wooden block, tap in a new gasket until its surface is flush with the front exhaust pipe.

NOTICE:

1. Be sure to install the gasket so that it faces the correct direction.
   
2. Do not reuse the gasket.
   
3. Do not damage the gasket.
   
4. When connecting the exhaust pipe, do not push in the gasket with the exhaust pipe.
   

for 3 Door:
Connect the center exhaust pipe to the 3 exhaust pipe supports.

for 5 Door:
Connect the center exhaust pipe to the 4 exhaust pipe supports.

Install the center exhaust pipe and 2 compression spring with the 2 bolts.

Torque:

43 N*m{438 kgf*cm, 32 ft.*lbf}

Connect the tailpipe to the exhaust pipe support.

Install a new gasket to the center exhaust pipe.

Connect the tailpipe to the center exhaust pipe.

Install the 2 bolts.

Torque:

48 N*m{489 kgf*cm, 35 ft.*lbf}