Purge Valve Inspection


  1. INSPECT PURGE VSV

Purge Valve -- Inspection



1. INSPECT PURGE VSV

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		23 to 26 Ω
    1 - Body ground
    		Always
    		10 MΩ or higher
    2 - Body ground
    HINT:
    When measuring the coil resistance make sure that the surface temperature of the purge VSV is 20°C.
    If the result is not as specified, replace the purge VSV.


  1. Check the operation.



      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.2Tr-Fe Emission Control.Emission Control System.Purge Valve Inspection

    1. Check that air does not flow from port E to port F.

      Text in Illustration
      *1
      		Port E
      *2
      		Port F
      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
      		Air

    2. Apply battery voltage across the terminals.



      3. Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.2Tr-Fe Emission Control.Emission Control System.Purge Valve Inspection

    3. Check that air flows from port E to port F.

      Text in Illustration
      *1
      		Port E
      *2
      		Port F
      Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155
      		Air
      If the result is not as specified, replace the purge VSV.