Camshaft Position Sensor Installation

Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

Install the camshaft position sensor with the bolt to the cylinder head cover sub-assembly.

Torque:

10 N*m{102 kgf*cm, 7 ft.*lbf}

NOTICE:

1. When reusing the camshaft position sensor, check the O-rings.
   
2. Make sure that the O-ring is not cracked or jammed when installing it on the cylinder head cover sub-assembly.
   
3. Replace with a new part if it is dropped or if it receives a strong impact.
   

Connect the camshaft position sensor connector.

While pushing the No. 1 engine cover sub-assembly towards the rear, attach the 2 rear pins.

Attach the 2 front clips to install the No. 1 engine cover sub-assembly.