Camshaft Position Sensor Installation


  1. INSTALL CAMSHAFT POSITION SENSOR

  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

Camshaft Position Sensor -- Installation



1. INSTALL CAMSHAFT POSITION SENSOR

  1. Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

  1. Install the camshaft position sensor with the bolt to the cylinder head cover sub-assembly.

    Torque:
    10 N*m{102 kgf*cm, 7 ft.*lbf}
    NOTICE:
    1. When reusing the camshaft position sensor, check the O-rings.
    2. Make sure that the O-ring is not cracked or jammed when installing it on the cylinder head cover sub-assembly.
    3. Replace with a new part if it is dropped or if it receives a strong impact.

  1. Connect the camshaft position sensor connector.



2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155

  1. While pushing the No. 1 engine cover sub-assembly towards the rear, attach the 2 rear pins.

  1. Attach the 2 front clips to install the No. 1 engine cover sub-assembly.