Meter / Gauge System How To Proceed With Troubleshooting

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. PROBLEM SYMPTOMS TABLE

  4. OVERALL ANALYSIS AND TROUBLESHOOTING

  5. REPAIR OR REPLACE

  6. CONFIRMATION TEST

Meter / Gauge System -- How To Proceed With Troubleshooting


HINT:
Use these procedures to troubleshoot the meter / gauge system.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE
      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    3.PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table (Toyota Fortuner RM000001F3000KX.html).

      Result
      Result
      		Proceed to
      Fault is not listed in problem symptoms table
      		A
      Fault is listed in problem symptoms table
      		B



    		B.
    Go to step 5
    A


    4.OVERALL ANALYSIS AND TROUBLESHOOTING

    1. Terminals of ECU (Toyota Fortuner RM0000011IV00HX.html)

    2. On-vehicle Inspection (Toyota Fortuner RM0000011JB00MX.html)


    NEXT


    5.REPAIR OR REPLACE

      NEXT


      6.CONFIRMATION TEST

        NEXT

        END