Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - EXTERIOR PANELS / TRIM
ROCKER PANEL MOULDING - REMOVAL
- HINT:
Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.
| 1. REMOVE FRONT FENDER MUDGUARD LH |
Remove the clip.
Using a T30 "TORX" socket, remove the 4 screws and mudguard.
| 2. REMOVE SIDE STEP ASSEMBLY LH |
Remove the 6 bolts and side step.
| 3. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH |
Remove the 8 side mudguard retainers and screw.
Detach the 10 clips and remove the rocker panel moulding.
