ROCKER PANEL MOULDING - REMOVAL

Use the same procedures for the RH side and LH side.

The procedures listed below are for the LH side.

1. REMOVE FRONT FENDER MUDGUARD LH

Remove the clip.

Using a T30 "TORX" socket, remove the 4 screws and mudguard.

2. REMOVE SIDE STEP ASSEMBLY LH

Remove the 6 bolts and side step.

Rocker Panel Moulding - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

3. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH

Remove the 8 side mudguard retainers and screw.

Detach the 10 clips and remove the rocker panel moulding.

Rocker Panel Moulding - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200