Front Bumper (W/ Winch) - Removal

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - EXTERIOR PANELS / TRIM

FRONT BUMPER (w/ Winch) - REMOVAL

1. PRECAUTION
  • NOTICE:
  • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for HID Headlight)
  • NOTICE:
  • When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
Front Bumper (W/ Winch) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 3 bolts and screw.

Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.

4. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
Front Bumper (W/ Winch) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 3 bolts and 2 screws.

Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.

5. REMOVE UPPER RADIATOR SUPPORT SEAL

Remove the 7 clips and radiator support seal.

Front Bumper (W/ Winch) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

6. REMOVE FRONT BUMPER WINCH COVER SUB-ASSEMBLY
Front Bumper (W/ Winch) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Detach the 2 claws.

Detach the 3 guides and remove front bumper winch cover sub-assembly.

7. REMOVE RADIATOR GRILLE ASSEMBLY
Front Bumper (W/ Winch) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Put protective tape around the radiator grille assembly.

Text in Illustration
*1Protective Tape

Remove the 3 screws.

Detach the 2 clips and 8 claws, and remove the radiator grille assembly.

w/ Wide View Front Monitor System:

Disconnect the connector.

8. REMOVE FRONT BUMPER COVER

Put protective tape around the bumper cover.

Front Bumper (W/ Winch) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Text in Illustration
*1Protective Tape--

Using a T30 "TORX" socket, remove the 6 screws.

Front Bumper (W/ Winch) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Text in Illustration
*ALH Side*BRH Side

Remove the 3 clips, 4 screws and 4 bolts.

Detach the 10 claws.

Front Bumper (W/ Winch) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Disconnect the winch control wire connector and remove the front bumper cover.

w/ Fog Light:


Disconnect the No. 4 engine room wire connector and remove the front bumper cover.

9. REMOVE FRONT BUMPER EXTENSION LH
Front Bumper (W/ Winch) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 3 bolts and front bumper extension LH.

10. REMOVE FRONT BUMPER EXTENSION RH
  • HINT:
  • Use the same procedure described for the LH side.
11. REMOVE FRONT BUMPER SIDE SUPPORT LH
Front Bumper (W/ Winch) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 2 screws.

Detach the 3 clips and remove the front bumper side support LH.

12. REMOVE FRONT BUMPER SIDE SUPPORT RH
  • HINT:
  • Use the same procedure described for the LH side.
13. REMOVE HEADLIGHT ASSEMBLY LH

for Halogen Headlight:


()

for HID Headlight:


()

14. REMOVE HEADLIGHT ASSEMBLY RH
  • HINT:
  • Use the same procedure described for the LH side.
15. REMOVE FRONT UPPER CENTER BUMPER RETAINER
Front Bumper (W/ Winch) - Removal. EXTERIOR PANELS / TRIM. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Remove the 3 bolts and front upper center bumper retainer.