Heat the cylinder head to approximately 80 to 100°C (176 to 212°F).

Using a precision straightedge and feeler gauge, measure the warpage of the surfaces where the cylinder head contacts the cylinder block and manifold.

Using SST and wooden blocks, compress the compression spring and remove the valve spring retainer locks.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 3UR-FE ENGINE MECHANICAL

Install the 2 noise filters to the cylinder head cover with the 2 bolts.

Install the timing chain cover stud bolt.

Using a vernier caliper, measure the diameter of the elongated thread at the measuring point.

Disconnect the sender gauge connector.

Engine LH Side:

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 3UR-FE ENGINE MECHANICAL