Rocker Panel Moulding - Removal
Using a clip remover, remove the 2 clips.
Rocker Panel Moulding - Components
Lexus IS250 IS220d GSE20 ALE20 EXTERIOR
Roof Drip Side Finish Moulding - Installation
Apply a 2 to 3 mm (0.07 to 0.11 in.) bead of adhesive (3M DP-105 or equivalent) from the tube to new No. 1 roof drip side finish moulding clips.
Roof Drip Side Finish Moulding - Removal
Put protective tape around the roof drip side finish moulding.
Roof Drip Side Finish Moulding - Components
Lexus IS250 IS220d GSE20 ALE20 EXTERIOR
Rear Door Belt Moulding - Installation
Lexus IS250 IS220d GSE20 ALE20 EXTERIOR
Rear Door Belt Moulding - Removal
Fully open the rear door glass.
Rear Door Belt Moulding - Components
Lexus IS250 IS220d GSE20 ALE20 EXTERIOR
Front Door Belt Moulding - Installation
Engage the 4 claws and install the front door inner glass weatherstrip.
Front Door Belt Moulding - Removal
Using a screwdriver wrapped with protective tape, disengage the 3 claws, and remove the front door inside handle bezel plug.