INSTALL FRONT DOOR BELT MOULDING ASSEMBLY

INSTALL FRONT DOOR FRAME COVER

INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP

INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

INSTALL COURTESY LIGHT ASSEMBLY

INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

POWER WINDOW CONTROL SYSTEM INITIALIZATION

Engage the 4 claws and install the front door inner glass weatherstrip.

Connect the rear door lock remote control cable and rear door inside locking cable to the front inside handle.

Connect each connector.

Engage the front door trim board with the 4 clips of the front door inner glass weatherstrip.

Engage the 9 clips and install the front door trim board to the front door panel.

Install the 2 screws.

Connect the connector.

Engage the claw and install the courtesy light assembly.

Connect each connector.

Engage the 4 claws and 2 clips, and install the power window regulator master switch assembly.

Engage the 3 claws and install the front door inside handle bezel plug.