| Website of Auto-Master.su

Stop Light Switch - Installation

Temporarily install the stop light switch assembly with the lock nut.

Measure the resistance according to the value(s) in the table below.

For w/o Illumination

For w/ Illumination

4. REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)

For w/o Illumination

For w/ Illumination

Check the protrusion of the stop light switch assembly shaft.

If the protrusion is not within the specified range, adjust it.

Lexus IS250 IS220d GSE20 ALE20 BRAKE

Connect the rear brake flexible hose with the union bolt and a new gasket.

Remove the brake tube with SST while holding the rear brake flexible hose with a wrench.

Lexus IS250 IS220d GSE20 ALE20 BRAKE

Install 2 new No. 1 caliper plates to the caliper support bracket.

Aligning the matchmarks, install the rear disc.

Subscribe to