Suspension Control System - Precaution
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 SUSPENSION CONTROL
Rear Differential Lock Position Switch (W/ Differential Lock) - Installation
Using a SST, install a new gasket and the indicator switch.
- SST
- 09922-10010
Rear Differential Lock Position Switch (W/ Differential Lock) - Inspection
Measure the resistance according to the value(s) in the table below.
Rear Differential Lock Position Switch (W/ Differential Lock) - Removal
Detach the 2 connector clamps and wire harness clamp.
Rear Differential Lock Position Switch (W/ Differential Lock) - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 AXLE AND DIFFERENTIAL
Rear Differential Lock Control Switch (W/ Differential Lock) - Installation
Attach the 2 claws to install the switch.
Rear Differential Lock Control Switch (W/ Differential Lock) - Inspection
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Switch Condition Specified Condition 1 (IG) - 4 (R) OFF 10 kΩ or higher RR Below 1 Ω
If the result is not as specified, replace the switch.
Rear Differential Lock Control Switch (W/ Differential Lock) - Removal
Place protective tape as shown in the illustration.
Rear Differential Lock Control Switch (W/ Differential Lock) - Components
Land Cruiser URJ200 URJ202 GRJ200 VDJ200 AXLE AND DIFFERENTIAL
Rear Differential Lock Actuator (W/ Differential Lock) - Installation
Remove any old FIPG material.