CLEAN INSTRUMENT SIDE PANEL LH

REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

REMOVE DIFFERENTIAL LOCK SWITCH

Place protective tape as shown in the illustration.

Using a moulding remover, detach the 6 claws and remove the instrument side panel.

Place protective tape as shown in the illustration.

Using a moulding remover, detach the 3 claws and remove the No. 1 instrument cluster finish panel garnish.

Place protective tape as shown in the illustration.

Using a moulding remover, detach the 2 claws and remove the No. 2 instrument cluster finish panel garnish.

Remove the 2 screws.

Detach the 3 claws.

Disconnect the connectors and remove the No. 1 instrument panel under cover.

Remove the clip.

Remove the screw.

Detach the 8 claws.

Remove the panel pad and disconnect the connectors and 2 clamps.

Place protective tape as shown in the illustration.

Using a moulding remover, detach the 7 claws and remove the panel cushion.

Using a screwdriver, detach the 2 claws and open the hole cover.

• HINT:

• Tape the screwdriver tip before use.

w/ Driver Side Knee Airbag:

w/o Driver Side Knee Airbag:

for Automatic Air Conditioning System:

Detach the 2 claws and disconnect the 2 control cables.

Disconnect the connectors and remove the lower No. 1 instrument panel finish panel.

Detach the 2 claws and remove the switch.