Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AXLE AND DIFFERENTIAL
REAR DIFFERENTIAL LOCK POSITION SWITCH (w/ Differential Lock) - INSTALLATION
| 1. INSTALL NO. 1 TRANSFER INDICATOR SWITCH |
Using a SST, install a new gasket and the indicator switch.
- SST
- 09922-10010
- Torque:
- without SST:
- 40 N*m{ 408 kgf*cm, 30 ft.*lbf}
- with SST:
- 28 N*m{ 283 kgf*cm, 20 ft.*lbf}
- NOTICE:
Rotate SST in the direction shown in the illustration.
Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).
Connect the connector.
| 2. INSTALL REAR DIFFERENTIAL LOCK ACTUATOR PROTECTOR |
Install the protector with the 2 nuts.
- Torque:
- 35 N*m{ 357 kgf*cm, 26 ft.*lbf}
| 3. INSTALL DIFFERENTIAL PROTECTOR ASSEMBLY |
Attach the protector with the bolt and nut.
- Torque:
- 15 N*m{ 150 kgf*cm, 11 ft.*lbf}
Connect the 2 connector clamps and wire harness clamp.
- NOTICE:
- Make sure the wire harness of the No. 4 transfer indicator switch fits inside the protector.