Connect 3 dry batteries of 1.5 V in series.

Disconnect the connector and 2 clamps.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 SUSPENSION CONTROL

Install the sensor with the bolt and nut.

Loosen the nut and adjust the link installation position by moving the height control sensor link up or down in the long hole of the bracket.

Connect 3 dry batteries of 1.5 V in series.

w/ KDSS:

Remove the 3 clips and front fender apron trim packing B.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 SUSPENSION CONTROL

Place the accumulator in a vise and saw a hole between A and B shown in the illustration using a saw to discharge the gas inside.

Install the bracket to the shock absorber control valve with the bolt.