Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - SUSPENSION CONTROL
HEIGHT CONTROL SENSOR (for Rear Side) - REMOVAL
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 2. REMOVE REAR WHEEL |
| 3. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH |
Disconnect the connector and 2 clamps.
Remove the 2 bolts, nut and sensor.
| 4. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH |
Disconnect the connector and 2 clamps.
Remove the 2 bolts, nut and sensor.