Disconnect the E1, E2, E3, 2A, 2B, 2C, and 2D ECU connectors.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 LIGHTING EXT

Unload the trunk and vehicle, and make sure that the spare tire, tools and jack are in their original positions.

Connect the intelligent tester to the DLC3.

The illuminated entry system controls the following lights:

If the voltage is below 11 V, recharge or replace the battery before proceeding.

except Double Swing Out Type:

When the doors are unlocked by a key or door control transmitter operation, when a door is opened or closed, or when the vehicle is approached while holding the door control transmitter, the illuminated entry system turns on the room light, map light and ignition switch illumination.

for Double Swing Out Type:

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 LIGHTING EXT

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 LIGHTING EXT

If even a thin film of oil is left on the surface of a headlight bulb, its service life will be shortened because the light will burn at a higher temperature. When replacing a bulb, be sure to hold the flanged part of the light so that your hand does not contact the glass part of the light.