Fuel Lid Lock Control -- Installation |
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1. INSTALL FUEL FILLER OPENING LID LOCK RETAINER |
 |
Install the fuel filler opening lid lock retainer and turn it counterclockwise as shown in the illustration.
| 2. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY |
 |
Install the fuel lid lock control cable and turn the fuel filler opening lid lock retainer clockwise as shown in the illustration.
for LHD:
Attach the cable to each of the clamps shown in the illustration and install new tape.
Install the fuel lid lock open lever.
Text in Illustration *1 Fuel Lid Lock Open Lever *2 Tape
for RHD:
Attach the cable to each of the clamps shown in the illustration and install new tape.
Install the fuel lid lock open lever.
Text in Illustration *1 Fuel Lid Lock Open Lever *2 Tape
| 3. INSTALL FRONT FLOOR CARPET ASSEMBLY |
Install the front floor carpet.
| 4. INSTALL QUARTER INSIDE TRIM BOARD LH |
Connect the power point socket connector.
Attach the 7 claws and 10 clips to install the quarter inside trim board.
Install the clip.
Install the rear door opening trim weatherstrip.
Connect the rear No. 2 seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
Connect the rear No. 1 seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
Attach the 2 claws to install the outer lap belt anchor cover.
- HINT:
- Use the same procedure for both outer lap belt anchor covers.
| 5. INSTALL QUARTER TRIM HOOK |
- HINT:
- Use the same procedure for both quarter trim hooks.
Install the quarter trim hook with the screw.
| 6. INSTALL BACK DOOR SCUFF PLATE |
Attach the 4 claws, 2 guides and 6 clips to install the back door scuff plate.
| 7. INSTALL LOWER CENTER PILLAR GARNISH LH |
Attach the 2 claws, 2 guides and 2 clips to install the lower center pillar garnish.
Install the front door opening trim and rear door opening trim weatherstrip.
Connect the front seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{428 kgf*cm, 31 ft.*lbf}
Attach the 2 claws to install the outer lap belt anchor cover.
| 8. INSTALL REAR DOOR SCUFF PLATE LH |
Attach the 2 clips and 7 claws to install the rear door scuff plate.
| 9. INSTALL COWL SIDE TRIM BOARD LH (for LHD) |
Attach the 2 clips to install the cowl side trim board.
Install the clip.
Install the front door opening trim.
| 10. INSTALL COWL SIDE TRIM BOARD RH (for RHD) |
- HINT:
- Use the same procedure described for the LH side.
| 11. INSTALL FRONT DOOR SCUFF PLATE LH |
Attach the 3 clips and 7 claws to install the front door scuff plate.
| 12. INSTALL FRONT DOOR SCUFF PLATE RH (for RHD) |
- HINT:
- Use the same procedure described for the LH side.
| 13. INSTALL CONSOLE BOX ASSEMBLY |
| 14. INSTALL REAR NO. 2 SEAT ASSEMBLY LH |
| 15. INSTALL REAR NO. 1 SEAT ASSEMBLY LH |
| 16. INSTALL REAR NO. 1 SEAT ASSEMBLY RH |
| 17. INSTALL FRONT SEAT ASSEMBLY LH |
for Manual Seat:
(Toyota Fortuner RM000000Z8T004X.html)
for Power Seat:
(Toyota Fortuner RM000003NZV00PX.html)
w/ Front Seat Side Airbag:
(Toyota Fortuner RM000000Z8T0AWX.html)
| 18. INSTALL FRONT SEAT ASSEMBLY RH |
- HINT:
- Use the same procedures described for the LH side.