Condenser (For 1Gr-Fe) Removal
RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
REMOVE FRONT BUMPER COVER
DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
REMOVE HOOD LOCK ASSEMBLY
REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY
REMOVE COOLER CONDENSER ASSEMBLY
Condenser (For 1Gr-Fe) -- Removal |
| 1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM |
Start up the engine.
Turn the A/C switch ON.
Operate the cooler compressor with an engine speed of approximately 1,000 rpm for 5 to 6 minutes to circulate the refrigerant and collect the compressor oil remaining in each component into the cooler compressor.
Stop the engine.
Using SST, discharge the refrigerant gas.
- SST
- 09985-20010(09985-02130,09985-02150,09985-02090,09985-02110,09985-02010,09985-02050,09985-02060,09985-02070)
| 2. REMOVE FRONT BUMPER COVER |
(Toyota Fortuner RM000003NP100MX.html)
| 3. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE |
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
- NOTICE:
- Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
| 4. DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY |
Remove the bolt and disconnect the air conditioning tube and accessory assembly from the cooler condenser.
Remove the O-ring from the air conditioning tube and accessory assembly.
- NOTICE:
- Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.
| 5. REMOVE HOOD LOCK ASSEMBLY |
Remove the 3 bolts.
Disconnect the hood lock control cable and remove the hood lock.
| 6. REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY |
Remove the 7 bolts and upper radiator support sub-assembly.
| 7. REMOVE COOLER CONDENSER ASSEMBLY |
Remove the cooler condenser assembly.
