Vehicle Stability Control System Dtc Check / Clear

  1. DTC CHECK/CLEAR (When Using Intelligent Tester)

  1. DTC CHECK/CLEAR (When not Using Intelligent Tester)

  1. END OF DTC CHECK/CLEAR

Vehicle Stability Control System -- Dtc Check / Clear



DTC CHECK/CLEAR (When Using Intelligent Tester)

  1. Check for DTCs.

    1. Turn the ignition switch off.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the intelligent tester on.

    5. Read the DTCs following the prompts on the tester screen. Enter the following menus: Chassis / ABS/VSC/TRC / DTC.

    6. Check the details of the DTCs (Toyota Fortuner RM000003NXZ001X.html).

  2. Clear the DTCs.

    1. Turn the ignition switch off.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the intelligent tester on.

    5. Operate the intelligent tester to clear the codes. Enter the following menus: Chassis / ABS/VSC/TRC / DTC / Clear.


DTC CHECK/CLEAR (When not Using Intelligent Tester)


  1. Check for DTCs.



      Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake Control.Vehicle Stability Control System.Vehicle Stability Control System Dtc Check / Clear

    1. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

      SST
      09843-18040

    2. Turn the ignition switch to ON.

    3. Observe the blinking pattern of the ABS warning and VSC OFF indicator lights in order to identify the DTC.

      HINT:
      If no code appears, inspect the TC and CG terminal circuit, and ABS warning and VSC OFF indicator light circuits.
      Trouble Area
      		See Procedure
      TC and CG terminal circuit
      		Toyota Fortuner RM000000XIU04JX.html
      ABS warning light circuit (Remains on)
      		Toyota Fortuner RM000003O4G003X.html
      ABS warning light circuit (Does not come on)
      		Toyota Fortuner RM000003O4H003X.html
      VSC OFF indicator light circuit (Remains on)
      		Toyota Fortuner RM000003O4M003X.html
      VSC OFF indicator light circuit (Does not come on)
      		Toyota Fortuner RM000003O4N003X.html


    4. As an example, the illustration below shows the blinking patterns of the normal system code and trouble codes 11 and 21 for the ABS warning and VSC OFF indicator lights.


      Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake Control.Vehicle Stability Control System.Vehicle Stability Control System Dtc Check / Clear

    5. After completing the check, disconnect terminals TC and CG of the DLC3 to turn off the display.
      If 2 or more DTCs are detected at the same time, the DTCs will be displayed in ascending order.



  2. Clear the DTCs.



      Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Brake Control.Vehicle Stability Control System.Vehicle Stability Control System Dtc Check / Clear

    1. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

      SST
      09843-18040

    2. Turn the ignition switch to ON.



      3. Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50

    3. Clear the DTCs stored in the ECU by depressing the brake pedal 8 times or more within 5 seconds.

    4. Check that the ABS warning and VSC OFF indicator lights indicate the normal system code.

    5. Remove SST from the terminals of the DLC3.


END OF DTC CHECK/CLEAR

  1. Turn the ignition switch to ON.

  2. Check that the ABS warning and VSC OFF indicator lights go off within approximately 3 seconds after turning the ignition switch to ON.