Front Differential Side Gear Shaft Oil Seal Replacement


  1. REMOVE FRONT WHEEL

  2. REMOVE FRONT SIDE MEMBER TO FRONT SUSPENSION CROSSMEMBER BRACE

  3. REMOVE NO. 1 ENGINE UNDER COVER

  4. REMOVE NO. 2 ENGINE UNDER COVER

  5. DRAIN DIFFERENTIAL OIL

  6. REMOVE FRONT SPEED SENSOR LH

  7. REMOVE FRONT SPEED SENSOR RH

  8. REMOVE FRONT LOWER BALL JOINT LH CASTLE NUT

  9. REMOVE FRONT LOWER BALL JOINT RH CASTLE NUT

  10. REMOVE FRONT STABILIZER LINK ASSEMBLY LH

  11. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

  12. REMOVE TIE ROD END SUB-ASSEMBLY LH

  13. REMOVE TIE ROD END SUB-ASSEMBLY RH

  14. REMOVE NO. 1 FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER LH

  15. REMOVE NO. 1 FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER RH

  16. REMOVE FRONT AXLE ASSEMBLY LH

  17. REMOVE FRONT AXLE ASSEMBLY RH

  18. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH

  19. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH

  20. REMOVE DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL

  21. INSTALL DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL

  22. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH

  23. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH

  24. INSTALL FRONT AXLE ASSEMBLY LH

  25. INSTALL FRONT AXLE ASSEMBLY RH

  26. INSTALL NO. 1 FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER LH

  27. INSTALL NO. 1 FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER RH

  28. INSTALL TIE ROD END SUB-ASSEMBLY LH

  29. INSTALL TIE ROD END SUB-ASSEMBLY RH

  30. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

  31. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

  32. INSTALL FRONT LOWER BALL JOINT LH CASTLE NUT

  33. INSTALL FRONT LOWER BALL JOINT RH CASTLE NUT

  34. INSTALL FRONT SPEED SENSOR LH

  35. INSTALL FRONT SPEED SENSOR RH

  36. INSPECT FRONT AXLE HUB BEARING BACKLASH

  37. INSPECT FOR FRONT AXLE HUB DEVIATION

  38. REFILL DIFFERENTIAL OIL

  39. INSTALL NO. 2 ENGINE UNDER COVER

  40. INSTALL NO. 1 ENGINE UNDER COVER

  41. INSTALL FRONT SIDE MEMBER TO FRONT SUSPENSION CROSSMEMBER BRACE

  42. INSTALL FRONT WHEEL

  43. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

  44. CHECK ABS SPEED SENSOR SIGNAL

Front Differential Side Gear Shaft Oil Seal -- Replacement



1. REMOVE FRONT WHEEL


2. REMOVE FRONT SIDE MEMBER TO FRONT SUSPENSION CROSSMEMBER BRACE


3. REMOVE NO. 1 ENGINE UNDER COVER


4. REMOVE NO. 2 ENGINE UNDER COVER


5. DRAIN DIFFERENTIAL OIL


6. REMOVE FRONT SPEED SENSOR LH

  1. Remove the speed sensor (Toyota Fortuner RM0000010JP003X.html).



7. REMOVE FRONT SPEED SENSOR RH

  1. Remove the speed sensor (Toyota Fortuner RM0000010JP003X.html).



8. REMOVE FRONT LOWER BALL JOINT LH CASTLE NUT

  1. Remove the castle nut (Toyota Fortuner RM0000010OU002X.html).



9. REMOVE FRONT LOWER BALL JOINT RH CASTLE NUT

  1. Remove the castle nut (Toyota Fortuner RM0000010OU002X.html).



10. REMOVE FRONT STABILIZER LINK ASSEMBLY LH

  1. Remove the stabilizer link (Toyota Fortuner RM0000010OY002X.html).



11. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

  1. Remove the stabilizer link (Toyota Fortuner RM0000010OU002X.html).



12. REMOVE TIE ROD END SUB-ASSEMBLY LH

  1. Remove the tie rod end (Toyota Fortuner RM000001643003X.html).



13. REMOVE TIE ROD END SUB-ASSEMBLY RH

  1. Remove the tie rod end (Toyota Fortuner RM000001643003X.html).



14. REMOVE NO. 1 FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER LH

  1. Remove the suspension arm lower (Toyota Fortuner RM0000010OU002X.html).



15. REMOVE NO. 1 FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER RH

  1. Remove the suspension arm lower (Toyota Fortuner RM0000010OU002X.html).



16. REMOVE FRONT AXLE ASSEMBLY LH

  1. Remove the axle (Toyota Fortuner RM00000112M004X.html).



17. REMOVE FRONT AXLE ASSEMBLY RH

  1. Remove the axle (Toyota Fortuner RM00000112M004X.html).



18. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH

  1. Remove the drive shaft (Toyota Fortuner RM000000ZZ9002X.html).



19. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH

  1. Remove the drive shaft (Toyota Fortuner RM000000ZZ9002X.html).



20. REMOVE DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Differential.Front Differential Side Gear Shaft Oil Seal.Front Differential Side Gear Shaft Oil Seal Replacement

  1. Using SST, tap out the oil seals.

    SST
    09308-10010


21. INSTALL DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL


Toyota Fortuner. Ggn50, 60 Kun51, 61 Tgn51 Lan50.Differential.Front Differential Side Gear Shaft Oil Seal.Front Differential Side Gear Shaft Oil Seal Replacement

  1. Apply MP grease to 2 new oil seals.

  1. Using SST and a hammer, tap in the 2 oil seals.

    NOTICE:
    Make sure the LH and RH oil seals are installed to the proper locations.
    SST
    09550-00032
    09950-70010(09951-07100)
    Standard oil seal depth:
    Side
    		Specified Condition
    LH side
    		0 +-0.45 mm (0 +-0.018 in.)
    RH side
    		5.3 +-0.5 mm (0.209 +-0.020 in.)


22. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH

  1. Install the drive shaft (Toyota Fortuner RM000000ZZA002X.html).



23. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH

  1. Install the drive shaft (Toyota Fortuner RM000000ZZA002X.html).



24. INSTALL FRONT AXLE ASSEMBLY LH

  1. Install the front axle (Toyota Fortuner RM00000112K004X.html).



25. INSTALL FRONT AXLE ASSEMBLY RH

  1. Install the front axle (Toyota Fortuner RM00000112K004X.html).



26. INSTALL NO. 1 FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER LH

  1. Install the suspension arm lower (Toyota Fortuner RM0000010OR002X.html).



27. INSTALL NO. 1 FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER RH

  1. Install the suspension arm lower (Toyota Fortuner RM0000010OR002X.html).



28. INSTALL TIE ROD END SUB-ASSEMBLY LH

  1. Install the tie rod end (Toyota Fortuner RM000001641003X.html).



29. INSTALL TIE ROD END SUB-ASSEMBLY RH

  1. Install the tie rod end (Toyota Fortuner RM000001641003X.html).



30. INSTALL FRONT STABILIZER LINK ASSEMBLY LH

  1. Install the stabilizer link (Toyota Fortuner RM0000010OV002X.html).



31. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

  1. Install the stabilizer link (Toyota Fortuner RM0000010OV002X.html).



32. INSTALL FRONT LOWER BALL JOINT LH CASTLE NUT

  1. Install the castle nut (Toyota Fortuner RM0000010OR002X.html).



33. INSTALL FRONT LOWER BALL JOINT RH CASTLE NUT

  1. Install the castle nut (Toyota Fortuner RM0000010OR002X.html).



34. INSTALL FRONT SPEED SENSOR LH

  1. Install the speed sensor (Toyota Fortuner RM0000010JM003X.html).



35. INSTALL FRONT SPEED SENSOR RH

  1. Install the speed sensor (Toyota Fortuner RM0000010JM003X.html).



36. INSPECT FRONT AXLE HUB BEARING BACKLASH

  1. Inspect the bearing backlash (Toyota Fortuner RM00000112K004X.html).



37. INSPECT FOR FRONT AXLE HUB DEVIATION

  1. Inspect for axle hub deviation (Toyota Fortuner RM00000112K004X.html).



38. REFILL DIFFERENTIAL OIL

  1. Refill differential oil (Toyota Fortuner RM0000010MD004X.html).



39. INSTALL NO. 2 ENGINE UNDER COVER


40. INSTALL NO. 1 ENGINE UNDER COVER


41. INSTALL FRONT SIDE MEMBER TO FRONT SUSPENSION CROSSMEMBER BRACE


42. INSTALL FRONT WHEEL


43. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

  1. Inspect and adjust the front wheel alignment (Toyota Fortuner RM0000010MX004X.html).



44. CHECK ABS SPEED SENSOR SIGNAL

  1. Check the ABS speed sensor signal (Toyota Fortuner RM00000102K00BX.html).