Install the starter with the 2 bolts.

Apply high-temperature grease to the parts indicated by the arrows in the illustration.

Perform the operation test without load.

Using snap ring pliers, remove the snap ring.

()

4. REMOVE FUEL COOLER ASSEMBLY (w/o DPF)

()

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 1VD-FTV STARTING

Install the flywheel housing side cover.

Apply high-temperature grease to the areas of the starter pinion drive lever indicated in the illustration.

Perform a pull-in test.

Remove the nut and disconnect the lead wire from the magnet starter switch.