A Direct Ignition System (DIS) is used on this vehicle.

The DIS is a 1-cylinder ignition system in which each cylinder is ignited by one ignition coil and one spark plug is connected to the end of each secondary wiring. A powerful voltage, generated in the secondary wiring, is applied directly to each spark plug. The sparks of the spark plugs pass from the center electrode to the ground electrodes.

Refer to DTC P0010 ().

The intake camshaft Variable Valve Timing (VVT) sensor (VV1, 2 signal) consists of a magnet and MRE (Magnetic Resistance Element).

This DTC is designed to detect opens or shorts in the camshaft oil control valve (OCV) circuit. If the OCV duty-cycle is excessively high or low while the engine is running, the ECM will illuminate the MIL and store the DTC.

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 3UR-FE ENGINE CONTROL

Warm up the engine.

If any of the following DTCs are stored, the ECM enters fail-safe mode to allow the vehicle to be driven temporarily.

Check and ensure the following conditions:

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 3UR-FE ENGINE CONTROL

Connect the intelligent tester to the DLC3.