Counter Gear And Reverse Idler Gear - Reassembly
Using SST and a press, install a new needle roller bearing inner race.
Counter Gear And Reverse Idler Gear - Inspection
Using a dial indicator and 2 V-blocks, measure the shaft runout.
- Maximum runout:
- 0.03 mm (0.0012 in.)
If the runout exceeds the maximum, replace the counter gear.
Counter Gear And Reverse Idler Gear - Disassembly
Using a feeler gauge, measure the reverse gear thrust clearance.
- Standard clearance:
- 0.12 to 0.28 mm (0.0047 to 0.0110 in.)
If the clearance is outside the specification, replace the defective gear, spline piece or bearing race.
Counter Gear And Reverse Idler Gear - Components
Lexus IS250 IS220d GSE20 ALE20 RA62 MANUAL TRANSMISSION
Output Shaft - Reassembly
Using SST and a press, install a new output shaft front bearing onto the output shaft.
Output Shaft - Inspection
Using a cylinder gauge, measure the inside diameter of the output shaft.
- Standard inside diameter:
- 45.009 to 45.025 mm (1.7720 to 1.7726 in.)
- Maximum inside diameter:
- 45.025 mm (1.7726 in.)
If the diameter exceeds the maximum, replace the output shaft.
Output Shaft - Disassembly
Remove the No. 3 synchronizer ring from the output shaft.
Output Shaft - Components
Lexus IS250 IS220d GSE20 ALE20 RA62 MANUAL TRANSMISSION
Input Shaft - Reassembly
Using SST and a press, install the input shaft front bearing onto the input shaft.
Input Shaft - Inspection
Using a dial indicator and 2 V-blocks, measure the shaft runout.
- Maximum runout:
- 0.03 mm (0.0012 in.)
If the runout exceeds the maximum, replace the input shaft.