Power Mirror Control System (W/ Memory) - Power Source Circuit
This is the power source circuit for the outer mirror control ECU.
Power Mirror Control System (W/ Memory) - Reverse Shift-Linked Function Of Power Mirrors Do Not Operate
A/T models:
After the ECM receives a reverse signal from the park/neutral position switch, the ECM sends a reverse signal to the outer mirror control ECU via the CAN and BEAN communication systems. The outer mirror control ECU activates the mirror motor in response to the reverse signal.
M/T models:
Power Mirror Control System (W/ Memory) - Power Mirrors Do Not Return To Memorized Position
When the seat memory switch M1, M2 or M3 is pressed, the position control ECU & switch (Seat ECU) transmits a signal of the memorized mirror position to the outer mirror control ECU by way of the power window regulator master switch. Then, the outer mirror control ECU drives the mirror motor.
Power Mirror Control System (W/ Memory) - Mirror Heater Does Not Operate With Rear Defogger Switch
Select the DTC check on the intelligent tester to check for communication errors.
Power Mirror Control System (W/ Memory) - Power Mirror Cannot Be Adjusted With Power Mirror Switch
Select the DTC check on the intelligent tester to check for communication errors.
Power Mirror Control System (W/ Memory) - On-Vehicle Inspection
Remote control
The mirror adjust switch can control the adjustment axis of the mirror surface.
Power Mirror Control System (W/ Memory) - Data List / Active Test
Connect the intelligent tester to the DLC3.
Power Mirror Control System (W/ Memory) - Diagnosis System
Data of the system can be read from the Data Link Connector 3 (DLC3) of the vehicle. Therefore, when the system seems to be malfunctioning, use the intelligent tester to check for a malfunction and repair it.
Power Mirror Control System (W/ Memory) - Terminals Of Ecu
Disconnect the M10 connector.
Power Mirror Control System (W/ Memory) - Problem Symptoms Table
Lexus IS250 IS220d GSE20 ALE20 MIRROR