Lexus IS250 IS220d GSE20 ALE20 - PROPELLER SHAFT
REAR PROPELLER SHAFT ASSEMBLY (for 2AD-FHV) - DISASSEMBLY
1. REMOVE PROPELLER INTERMEDIATE SHAFT |
Put matchmarks on the intermediate shaft and propeller shaft.
Separate the intermediate shaft and propeller shaft.
- NOTICE:
- Be careful not to damage the spline.
Remove the adjusting nut from the intermediate shaft.
Remove the dust boot from the propeller shaft.
- HINT:
- If the dust boot is to be reused, remove it after wrapping vinyl tape around the spline so that it will not be damaged.
2. REMOVE NO. 1 CENTER SUPPORT BEARING ASSEMBLY |
Using a snap ring expander, remove the snap ring.
Using SST and a press, remove the No. 1 center support bearing assembly and No. 2 dust deflector.
- SST
- 09950-00020
Using SST and a press, remove the No. 1 dust deflector.
- SST
- 09950-00020
LEXUS IS250, IS220d / GSE20 ALE20