PARKING ASSIST MONITOR SYSTEM - Reverse Signal Circuit

Move the shift lever to the R position and check if the back-up light comes on.

• OK:
• The back-up light comes on.

Move the shift lever to the position other than R and check if the back-up light does not come on.

• OK:
• The back-up light does not come on.

Disconnect the television camera ECU connector J92 and park/neutral position SW (A/T) or back-up light SW (M/T) connector.

Measure the resistance according to the value(s) in the table below.

• Standard resistance:

• Tester connection	Condition	Specified condition
  J92-3 (REV) - E45-1 (A/T)	Always	Below 1 Ω
  J92-3 (REV) - E55-1 (M/T)	Always	Below 1 Ω
  J92-3 (REV) - Body ground	Always	10 kΩ or higher