NETWORK GATEWAY ECU - INSTALLATION

1. INSTALL NETWORK GATEWAY ECU

Install the network gateway ECU.

Engage the 2 claws to install the cover.

Connect the connector.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for LHD)

Connect the connectors.

Engage the 2 claws.

Install the glove compartment door assembly with the 5 screws.

3. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (for LHD)

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

Engage the 4 clips and install the No. 2 instrument panel under cover sub-assembly.

5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for RHD)

Connect the connectors.

Engage the 7 clips and install the lower instrument panel finish panel sub-assembly.

6. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

Connect the connectors.

Insert the No. 1 instrument panel under cover sub-assembly into the guide as shown in the illustration.

Engage the 2 claws.

Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <E-.

7. INSTALL SIDE INSTRUMENT PANEL

Engage the 5 claws and 3 clips, and then install the side instrument panel RH.

8. INSTALL FRONT DOOR OPENING TRIM COVER

Engage the 6 claws and install the front door opening trim cover RH.

9. INSTALL FRONT DOOR SCUFF PLATE

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

11. PERFORM INITIALIZATION

Some systems need initialization when disconnecting the cable from the negative battery terminal .

LEXUS IS250, IS220d / GSE20 ALE20