Headlight Dimmer Switch Removal

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Lighting (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE SPIRAL CABLE

  3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

  4. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY

Headlight Dimmer Switch -- Removal


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE SPIRAL CABLE

  1. Remove the spiral cable (Click here).



3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the 2 connectors.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Headlight Dimmer Switch Removal

  1. Using a screwdriver wrapped with protective tape, disengage the claw and remove the wiper switch.

    Text in Illustration
    *a
    		Protective Tape
    NOTICE:
    If the claw is pushed with excessive force, it may be broken.


4. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Lighting (Ext).Lighting System.Headlight Dimmer Switch Removal

  1. for clamp Type:

    Text in Illustration
    *A
    		for Clamp Type
    *B
    		for Press Fit Type

    1. Disconnect the connector.

    2. While loosening the band clamp as shown in the illustration, detach the claw to remove the dimmer switch.

  1. for Press Fit Type:

    1. Disconnect the connector.

    2. Pull the headlight dimmer switch toward the seat to detach the 2 claws and remove it.