Power Steering Oil Pressure Switch Removal

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
3Ur-Fe Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

  4. REMOVE AIR CLEANER HOSE ASSEMBLY

  5. REMOVE AIR CLEANER ASSEMBLY

  6. REMOVE V-BANK COVER SUB-ASSEMBLY

  7. REMOVE FAN AND GENERATOR V BELT

  8. DRAIN POWER STEERING FLUID

  9. REMOVE FRONT WHEEL

  10. REMOVE FRONT FENDER APRON SEAL FRONT RH

  11. REMOVE POWER STEERING OIL PRESSURE SWITCH

Power Steering Oil Pressure Switch -- Removal



1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 3 bolts and screw.

  1. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly LH.



2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 3 bolts and 2 screws.

  1. Turn the clip indicated by the arrow in the illustration to remove the front fender splash shield sub-assembly RH.



3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 10 bolts and No. 1 engine under cover.



4. REMOVE AIR CLEANER HOSE ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the vacuum hose and No. 2 ventilation hose.

  1. Loosen the 2 hose clamps.

  1. Remove the air cleaner hose.



5. REMOVE AIR CLEANER ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 3 bolts and air cleaner.



6. REMOVE V-BANK COVER SUB-ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.3Ur-Fe Engine Control.Sfi System.Power Steering Oil Pressure Switch Removal

  1. Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

    Text in Illustration
    *1
    		Bracket
    *2
    		Hook
    *3
    		Pin
    *4
    		Grommet


7. REMOVE FAN AND GENERATOR V BELT


    Land Cruiser. Urj200, 202 Grj200 Vdj200.3Ur-Fe Engine Control.Sfi System.Power Steering Oil Pressure Switch Removal

  1. While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and then insert a bar of 5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.

    Text in Illustration
    *1
    		Bar
    HINT:
    The pulley bolt for the belt tensioner has a left-hand thread.

  1. Remove the V belt.



8. DRAIN POWER STEERING FLUID


9. REMOVE FRONT WHEEL


10. REMOVE FRONT FENDER APRON SEAL FRONT RH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Using a clip remover, remove the 3 clips and fender apron seal.



11. REMOVE POWER STEERING OIL PRESSURE SWITCH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Disconnect the switch connector.

  1. Using a 24 mm deep socket wrench, remove the oil pressure switch.

  1. Remove the O-ring.