Rear Air Conditioning Unit (W/O Heater) -- Reassembly |
| 1. INSTALL WIRING AIR CONDITIONING HARNESS SUB-ASSEMBLY |
| 2. INSTALL EVAPORATOR SUB-ASSEMBLY |
 |
Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the hose joint.
- Compressor oil:
- ND-OIL 8 or equivalent
Install the 2 O-rings to the evaporator.
Install the evaporator.
Install the rear cooling unit case LH with the 12 screws.
 |
| 3. INSTALL REAR BLOWER MOTOR |
 |
Install the blower motor with the 3 screws.
Connect the connector.
| 4. INSTALL BLOWER RESISTOR |
 |
Install the blower resistor with the 2 screws.
Connect the connector.
| 5. INSTALL REAR COOLING UNIT EXPANSION VALVE |
 |
Using a 4 mm hexagon wrench, install the expansion valve with the 2 hexagon bolts.
- Torque:
- 3.5 N*m{36 kgf*cm, 31 in.*lbf}
Attach the clamp.
Connect the connector.
| 6. INSTALL AIR CONDITIONER ACCESSORY ASSEMBLY |
 |
Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the hose joint.
- Compressor oil:
- ND-OIL 8 or equivalent
Install the 2 O-rings to the air conditioner accessory assembly.
Install the air conditioner accessory assembly.
Install the bolt and 2 screws.
- Torque:
- 5.4 N*m{55 kgf*cm, 48 in.*lbf}
Install new packing as shown in the illustration.
 |
| 7. INSTALL DRAIN COOLER HOSE |
 |
Attach the claw to install the drain hose.
Install the screw.
| 8. INSTALL REAR SIDE NO. 3 AIR DUCT |
 |
Install the duct with the 2 screws.
- Torque:
- 5.4 N*m{55 kgf*cm, 48 in.*lbf}
| 9. INSTALL COOLING UNIT BRACKET |
 |
Install the bracket with the 2 screws.
- Torque:
- 5.4 N*m{55 kgf*cm, 48 in.*lbf}