INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)
INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)
Fuel Lid Lock Control Cable Assembly (For Hatchback 3 Door) -- Installation |
| 1. INSTALL FUEL FILLER OPENING LID LOCK RETAINER |
Align the 2 claws B of the fuel filler opening lid lock retainer with the 2 slits.
 |
Push in and install the fuel filler opening lid lock retainer while securely engaging the 2 claws A.
Text in Illustration *1 Claw A *2 Claw B *3 Slit
| 2. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY |
Engage the 4 clamps and install the fuel lid lock control cable as shown in the illustration.
Text in Illustration *1 Fuel Lid Lock Control Cable Sub-assembly *2 Wire Harness Clamp
Engage the 2 claws and install the fuel lid lock control cable.
 |
| 3. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY |
Connect the fuel lid lock control cable.
Engage the guide.
 |
Install the fuel lid lock open lever with the bolt.
- Torque:
- 5.5 N*m{56 kgf*cm, 49 in.*lbf}
| 4. INSTALL FRONT FLOOR CARPET ASSEMBLY |
Engage the 6 clamps.
Install the front floor carpet with the clip.
| 5. INSTALL JACK ASSEMBLY |
| 6. INSTALL JACK COVER |
| 7. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH |
- HINT:
- Use the same procedure as for the RH side (YARIS_NCP93 RM0000036M300YX_01_0033.html)
| 8. INSTALL NO. 2 ROOM LIGHT ASSEMBLY |
Connect the connector.
Engage the claw to install the No. 2 room light assembly.
 |
| 9. INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH |
Engage the 2 claws and install the rear seat 3 point type outer belt.
Tighten the bolt.
- Torque:
- 41 N*m{420 kgf*cm, 30 ft.*lbf}
| 10. INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH |
- HINT:
- Use the same procedure as for the RH side.
| 11. INSTALL REAR FLOOR FINISH PLATE |
Engage the 4 guides and the 4 claws to install the rear floor finish plate.
| 12. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH |
Engage the 8 clips and the 10 claws.
Engage the 3 guides and install the quarter trim panel.
| 13. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH |
- HINT:
- Use the same procedure as for the RH side.
| 14. INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH |
Install the floor end of the front seat outer belt with the bolt.
- Torque:
- 41 N*m{420 kgf*cm, 30 ft.*lbf}
Engage the 2 claws and install the anchor cover.
| 15. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH |
- HINT:
- Use the same procedure as for the RH side.
| 16. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH |
Install the front door opening trim.
| 17. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
Install the front door opening trim.
| 18. INSTALL COWL SIDE TRIM BOARD RH |
Engage the clip.
Install the cowl side trim board with clip.
| 19. INSTALL COWL SIDE TRIM BOARD LH |
- HINT:
- Use the same procedure as for the RH side.
| 20. INSTALL FRONT DOOR SCUFF PLATE RH |
Engage the 8 claws and install the front door scuff plate.
| 21. INSTALL FRONT DOOR SCUFF PLATE LH |
- HINT:
- Use the same procedure as for the RH side.
| 22. INSTALL REAR CONSOLE BOX |
| 23. INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side) |
| 24. INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side) |
| 25. INSTALL REAR SEAT ASSEMBLY (for Fold Down Seat Type) |
| 26. INSTALL FRONT SEAT ASSEMBLY (for Driver Side) |
| 27. INSTALL FRONT SEAT ASSEMBLY (for Front Passenger Side) |
| 28. INSTALL DECK BOARD ASSEMBLY |
Install the deck board.