Back Door Glass (For Hatchback) Removal

Vehicle Exterior. Yaris. Ncp93, 131
Window Glass. Yaris. Ncp93, 131

  1. REMOVE REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)

  2. REMOVE BACK DOOR TRIM BOARD

  3. REMOVE REAR WIPER ARM HEAD CAP (w/ Rear Wiper)

  4. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper)

  5. REMOVE REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)

  6. REMOVE REAR WIPER MOTOR GROMMET (w/ Rear Wiper)

  7. REMOVE BACK DOOR PANEL NO. 2 PROTECTOR

  8. REMOVE BACK DOOR PANEL NO. 1 PROTECTOR

  9. REMOVE BACK DOOR GLASS

  10. REMOVE BACK WINDOW GLASS ADHESIVE DAM

  11. REMOVE BACK WINDOW GLASS CLIP LH

  12. REMOVE BACK WINDOW GLASS CLIP RH

Back Door Glass (For Hatchback) -- Removal



1. REMOVE REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)
(YARIS_NCP93 RM000002RLG00BX.html)


2. REMOVE BACK DOOR TRIM BOARD


    Yaris. Ncp93, 131

  1. Disengage the 11 clips and remove the back door trim board.



3. REMOVE REAR WIPER ARM HEAD CAP (w/ Rear Wiper)


    Yaris. Ncp93, 131

  1. Disengage the 2 claws and the 2 hinges, and remove the rear wiper arm head cap.



4. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY (w/ Rear Wiper)


    Yaris. Ncp93, 131

  1. Remove the nut and the rear wiper arm and blade assembly.



5. REMOVE REAR WIPER MOTOR ASSEMBLY (w/ Rear Wiper)


    Yaris. Ncp93, 131

  1. Disconnect the connector.

  1. Loosen the 3 bolts and remove the rear wiper motor assembly.



6. REMOVE REAR WIPER MOTOR GROMMET (w/ Rear Wiper)


    Yaris. Ncp93, 131

  1. Remove the rear wiper motor grommet.



7. REMOVE BACK DOOR PANEL NO. 2 PROTECTOR


    Yaris. Ncp93, 131.Window Glass.Power Window Control System (For Sedan).Back Door Glass (For Hatchback) Removal

  1. Remove the 2 clips.

    Text in Illustration
    *1
    		Double-sided Tape

  1. While peeling off the double-sided tape, remove the back door panel protector.



8. REMOVE BACK DOOR PANEL NO. 1 PROTECTOR
HINT:
Use the same procedure as for the No. 2 side.


9. REMOVE BACK DOOR GLASS


    Yaris. Ncp93, 131.Window Glass.Power Window Control System (For Sedan).Back Door Glass (For Hatchback) Removal

  1. Apply protective tape to the outer surface of the vehicle body to prevent scratches.

    Text in Illustration
    *1
    		Protective Tape


    Yaris. Ncp93, 131.Window Glass.Power Window Control System (For Sedan).Back Door Glass (For Hatchback) Removal

  1. Place matchmarks on the back door glass and vehicle body on the locations indicated in the illustration.

    Text in Illustration
    *a
    		Mark
    HINT:
    Matchmarks are not necessary if the back door glass is not going to be reused.


    Yaris. Ncp93, 131

  1. Disconnect the 2 connectors.

    HINT:
    If the vehicle is equipped with rear window defogger, disconnect the connector.


    Yaris. Ncp93, 131.Window Glass.Power Window Control System (For Sedan).Back Door Glass (For Hatchback) Removal

  1. Pass a piano wire between the vehicle body and glass from the interior.

    Text in Illustration
    *1
    		Piano Wire

  1. Tie both wire ends to wooden blocks or similar objects.

  1. Cut off the adhesive by pulling the piano wire around the back door glass.

    NOTICE:
    When separating the back door glass from the vehicle, be careful not to damage the paint or interior and exterior ornaments.


    Yaris. Ncp93, 131

  1. Using suction cups, disengage the 2 clips and remove the back door glass.

    NOTICE:
    Be careful not to drop the back door glass.


10. REMOVE BACK WINDOW GLASS ADHESIVE DAM

  1. Using a scraper, remove the back window glass adhesive dam.

    NOTICE:
    1. Be careful not to damage the back door glass.
    2. Be sure to replace the back window glass adhesive dam with a new one.


11. REMOVE BACK WINDOW GLASS CLIP LH

  1. Using a scraper, remove the back window glass clip.

    NOTICE:
    1. Be careful not to damage the back door glass.
    2. Be sure to replace the back window glass clip with a new one.


12. REMOVE BACK WINDOW GLASS CLIP RH

  1. Using a scraper, remove the back window glass clip.

    NOTICE:
    1. Be careful not to damage the back door glass.
    2. Be sure to replace the back window glass clip with a new one.