Vehicle Stability Control System Slip Indicator Light Remains On

Brake. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Brake Control. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

PREPARE FOR INSPECTION

CHECK CAN COMMUNICATION SYSTEM

CHECK SKID CONTROL ECU CONNECTOR

INSPECT COMBINATION METER ASSEMBLY

VEHICLE STABILITY CONTROL SYSTEM - Slip Indicator Light Remains ON


DESCRIPTION

The slip indicator blinks during VSC and/or TRC operation.
When the VSC/TRC system fails, the slip indicator comes on to warn the driver.

WIRING DIAGRAM


Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Brake Control.Anti-Lock Brake System.Vehicle Stability Control System Slip Indicator Light Remains On


INSPECTION PROCEDURE

NOTICE:
When replacing the brake actuator assembly, perform the zero point calibration (RAV4_ACA30 RM000001K1O00SX.html).
1.PREPARE FOR INSPECTION

  1. Check that the following condition is satisfied.

    1. The vehicle is not in inspection mode.
      HINT:
      Confirm if the vehicle is in the inspection mode or not by using the intelligent tester Data List.

NEXT


2.CHECK CAN COMMUNICATION SYSTEM

  1. Check if a CAN communication system DTC is output (RAV4_ACA30 RM000001W16002X.html).

    Result:
    Result
    		Proceed to
    DTC is not output.
    		A
    DTC is output.
    		B


B
REPAIR CAN COMMUNICATION SYSTEM (RAV4_ACA30 RM000001W16002X.html)
A


3.CHECK SKID CONTROL ECU CONNECTOR

  1. Check if the skid control ECU connector is securely connected.

    OK:
    The connector is securely connected.


NG
CONNECT CONNECTOR CORRECTLY
OK


4.INSPECT COMBINATION METER ASSEMBLY

  1. Inspect the combination meter (RAV4_ACA30 RM0000020M0001X.html).



NG
REPLACE COMBINATION METER ASSEMBLY (RAV4_ACA30 RM000001RH400AX.html)
OK

REPLACE BRAKE ACTUATOR ASSEMBLY (RAV4_ACA30 RM000001XV200PX.html)